Adimtech APDCAM Bedienerhandbuch PDF herunterladen (Seite 27)

10 GB Communication

Version

1.0

& Control Card Instruction Manual

4.8 LED Connector

The status LEDs port (connector I) is a 10-pin output port on the board

and it can be used to directly drive the LEDs on the front panel of the device

(serial resistors required). POWER ON is high after power up. ERROR is high

if the Hardware Error register is not zero. The OVERLOAD output is driven by

the OVERLOAD input of the CONTROL connector.

Description

Direction

GND

POWER

Output

ERROR

Output

STREAMING

Output

EXT. CLOCK VALID

Output

PDI COMMUNICATION

Output

OVERLOAD

Output

CAM TIMER ARMED

Output

CAM TIMER TRIGGER OUT

Output

GND

Connector type: Samtec SHF-105-01-L-D-TH

(Cable strip: Samtec FFSD-05-01-N)

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 82 83

Keine Kommentare

Adimtech APDCAM Bedienerhandbuch Seite 27