
38
& Control Card Instruction Manual
RESET instruction
1 - Serial Communication Bus Reset
2 – Parallel Data Interface Reset
Description:
The System Reset resets the whole controller. The reset time is about
2000 ms.
The ResetTime determines the width of the reset pulse during Serial
Communication Bus Reset or Parallel Data Interface Reset:
t
Reset Width
= ResetTime [ms]
LOCK instruction
Description:
The LOCK instruction locks the device with the LockKey. The locked
device performs SENDACK, READSDRAM, FLREAD, SCBREADCA, SCBREADRA
and UNLOCK instructions only. Don’t forget the LockKey! Without it you
cannot unlock the device via Ethernet. If you forget the LockKey use the
Reset Defaults pin to unlock the device.
Kommentare zu diesen Handbüchern